Description
Easy to use: Display data at the touch of a button. Press M to display KWH and electricity costs. Press + to display watts (active power) and VA (apparent power). Press OK to display the real RMS voltage Vrms and the real RMS current arms. Press – to display Hz (frequency) and PF (power factor). Press the button to display the maximum and minimum power. Press OK for 3 seconds to display the entire accumulated time.
Monitoring of household appliances: Install this energy cost meter between the device and the socket. The power meter measures the power consumption of the device and automatically calculates the electricity bill only when the device runs at more than 2 watts. Suitable for computers, game consoles, printers, TVs, refrigerators, washing machines, dryers, routers, etc.
Overload warning: When the load power exceeds the overload setting value, the power consumption exceeds the KWH alarm setting value, the electricity costs exceed the cost alarm setting value, the LCD displays “overload”, “kWh alarm” or “cost alarm” and the LED light flashes continuously to warn users. Ideal for monitoring the energy consumption of household appliances.
Data storage: the power meter for socket has a built-in high-precision chip that stores the data in the event of a power failure. It has a reset function and the ability to erase measurement data but maintain set parameters for switching between multiple devices. It can effectively monitor power consumption, reduce electricity bills and save energy.
Improved LCD display: wide viewing angles are ideal for reading and recording the data at any angle. No need to stand on the front of the display and bend over to read the numbers, especially if the electricity cost meter is not at eye level or is only visible from an angle. Note: there is no backlight.
Reviews
There are no reviews yet.